Business Liability Insurance: General, Professional and Product
"Liability insurance" is a family of coverages, not one policy. Each member answers a different question: someone was hurt at your business, your product caused harm, your advice cost a client money, or a judgment ran past your limits. Most mistakes happen when an owner assumes one policy answers all four. This guide explains what general liability usually covers, what it leaves out, how product and professional liability fit around it, and what to ask an agent before you sign a contract that demands proof of insurance.
What general liability covers
Commercial general liability (CGL) responds when a third party says your business caused them harm. Triple-I describes the core protection as legal liability for bodily injury and property damage to others, plus personal and advertising injury. The NAIC lists the same ground: injury to people, damage to other people's property, slander or libel, and false or misleading advertising.
Liability insurance also pays for your defense, and Triple-I notes this applies even when a claim lacks merit. Defense can be a large part of the value, because a lawsuit costs money before anyone decides who is right.
Triple-I gives plain examples of the kind of claim involved: a customer trips on loose flooring, an employee leaves water running and damages a customer's home, or a class action alleges misleading advertising.
How the standard form is organized
Many policies follow a standard Insurance Services Office (ISO) structure, so the parts are worth knowing. Wording varies by insurer and edition, so your own policy controls.
- Coverage A, bodily injury and property damage. Triple-I says this can include mental injury or emotional distress.
- Coverage B, personal and advertising injury. Offenses such as libel, slander, copyright infringement in advertising, malicious prosecution, wrongful eviction and invasion of privacy.
- Coverage C, medical payments. Pays medical costs for non-employees hurt in an accident tied to your premises or operations. It is no-fault, and Triple-I notes it carries no defense or legal liability coverage.
Limits come in two layers. Triple-I explains that the per-occurrence limit is the most the insurer pays for one event, however many people claim. The policy also has aggregate limits that cap what it pays across the policy period.
Occurrence versus claims-made
Triple-I explains that an occurrence policy covers harm caused by incidents that happened while the policy was in force. A claims-made policy responds to the policy in force when the claim is made. For general liability the occurrence form is common. Claims-made wording is more often seen with professional liability, so ask which one you are buying and what the retroactive date and reporting period are.
Common exclusions
A general liability policy is built around a few risks and leaves others to different policies. Items that Triple-I, the NAIC or the Texas Department of Insurance (TDI) list as typically excluded:
- Professional errors and omissions. The NAIC gives failure to provide appropriate advice as an example.
- Employee injury. Work injuries are handled by workers' compensation, and employment practices claims such as wrongful termination need their own coverage.
- Autos. Auto liability is excluded because commercial auto is a separate policy.
- Pollution. TDI says a pollution exclusion removes coverage for third-party injury from a pollution event, and a total pollution exclusion removes it even for products and completed operations. Partial exclusions have exceptions. Triple-I says an endorsement may add limited coverage and that higher-risk businesses should consider a separate pollution policy.
- Liability assumed only by contract. TDI says the exclusion has exceptions, including liability you would have without the contract and liability under an "insured contract." Breach of contract, such as missing a construction deadline, is not covered.
- Your own work or product. TDI says damage to your work or product is generally excluded, with an exception where a subcontractor caused the damage to your work.
- Recall costs and punitive damages. Triple-I says the standard form does not cover recall of products, work or impaired property, and punitive damages are generally not covered, with some exceptions.
- Liquor liability. Triple-I says this needs an add-on or separate policy.
Read the exclusions and endorsements in your actual policy. A short list in a guide cannot replace them.
Product liability and completed operations
General liability has a second half that often goes unnoticed. TDI describes products and completed operations coverage as injury or damage that happens away from your premises and is caused by your products or by work you have finished. Triple-I notes that for products, covered injury generally has to occur away from your own premises.
Triple-I says product liability coverage can be added to a general liability policy or bought as a stand-alone policy, and that it is aimed at companies that design, manufacture, distribute or sell a physical product. Triple-I also points out that a company that only repackages and distributes goods made elsewhere can still face liability or defense costs, and that retailers or investors may require the coverage.
Completed operations matters to contractors and service businesses because a problem can surface after the job is done and the crew has left.
Professional liability is a separate question
Professional liability, also called errors and omissions (E&O), covers claims that your advice or services caused a client a loss. The NAIC says standard general liability excludes professional errors and omissions, and Triple-I says professional liability is not part of a businessowners policy. See the professional liability guide for detail.
Businessowners policy versus standalone policies
Triple-I describes a businessowners policy (BOP) as a package that combines property, business interruption and liability in one contract. It is designed for small and medium-sized businesses. Triple-I gives "100 employees or fewer and revenues of up to about $5 million" as the typical profile, and says some types of business, such as restaurants, may be ineligible.
The limits are the tradeoff. Triple-I says a BOP does not cover every risk and its limits are usually lower, and it suggests an excess or umbrella policy to raise protection. The NAIC adds that a BOP typically leaves out commercial auto and workers' compensation. Businesses with unusual exposures may need coverage built from separate policies.
Umbrella and excess liability
An umbrella or excess policy sits above other liability coverage. TDI describes umbrella liability as excess coverage above the limits of auto and general liability policies, and notes it can cover some exposures the primary policies do not, unless the umbrella excludes them. Triple-I says an umbrella begins paying when a covered loss uses up the primary policy's per-occurrence limit.
Triple-I also says most umbrella policies exclude certain risks, including employment practices liability and professional liability. Ask which underlying policies the umbrella requires and what it excludes.
Certificates of insurance and additional insureds
Clients, landlords and general contractors often ask for a certificate of insurance and for additional insured status. They are not the same thing.
- TDI says a certificate summarizes coverage that already exists in the policy and cannot say anything different from the policy.
- A certificate holder may not use the certificate to claim new or extra rights beyond the policy or its endorsements.
- TDI advises checking the "Additional Insured" box only if the policy has an endorsement naming that holder. A blanket additional insured endorsement does not name a specific holder, so the certificate can say the endorsement exists but cannot state that the holder is an additional insured.
Certificate rules differ by state, so check your state insurance department. If a contract requires additional insured status, ask the agent to show you the endorsement itself, not only the certificate.
Subcontractor risk
If you hire others, their mistakes can become your problem. Triple-I notes that a business may ask a subcontractor to carry owners and contractors protective liability coverage, which protects the property owner or general contractor from liability for the hired party's negligent acts. TDI also notes that a general liability policy may respond to damage to your work caused by a subcontractor.
Ask what proof of coverage you collect from subcontractors and how your own policy treats their work.
Choosing limits from your contracts
No authoritative source sets one right limit for every business. The NAIC says umbrella coverage may suit owners with large assets or high lawsuit exposure and reports umbrella limits that typically run from $1 million to $5 million. Beyond that, the practical starting point is your contracts. Lease, client and vendor agreements often state required per-occurrence and aggregate limits, additional insured wording and umbrella requirements. Gather them before you ask for a quote and give the agent the actual language.
Which policy answers which question
| Coverage | Question it answers | Usually does not answer |
|---|---|---|
| General liability | Someone was injured or their property damaged by your operations, or you face a libel or advertising claim | Professional advice errors, employee injuries, autos |
| Product liability | A product you made, distributed or sold harmed someone | Recall costs unless added |
| Professional liability (E&O) | A client says your advice or service caused a financial loss | Bodily injury from premises accidents |
| Umbrella / excess | A covered claim exceeds the underlying policy's limit | Often professional and employment practices claims |
Questions to ask an agent
- What does our general liability policy exclude for our kind of work, including pollution and contractual liability?
- Is the policy occurrence or claims-made, and what are the limits per occurrence and in total?
- Is products and completed operations coverage included, or is it separate?
- Do we also need professional, product or umbrella coverage?
- What limits and wording do our contracts require?
- Can you issue additional insured endorsements, not just certificates?
- How are subcontractors treated, and what should we collect from them?
- If we buy a BOP, what is left out?
Find an agency
Agencies that list general liability on their own sites are on the general liability coverage page, with a state filter. Check any agency's license with your state regulator before sharing details. See how to check an agency's license.
Frequently asked questions
Does general liability cover my own employees if they are hurt?
Usually not. The NAIC and Triple-I both say employee work injuries are typically handled by workers' compensation, and TDI says general liability is not intended to provide workers' compensation or employer's liability coverage. Rules on who must carry workers' compensation vary by state, so check your state's workers' compensation agency.
Does general liability cover mistakes in my professional advice?
Generally no. The NAIC says standard general liability excludes professional errors and omissions, such as failure to provide appropriate advice. If clients rely on your advice or services, ask an agent about professional liability, which Triple-I says is not included in a businessowners policy.
Is a certificate of insurance the same as being an additional insured?
No. TDI says a certificate only summarizes existing coverage and cannot add rights beyond the policy. The additional insured box should be checked only if the policy has an endorsement naming that holder. Ask for the endorsement if a contract requires the status.
Does a BOP include everything a small business needs?
Not necessarily. Triple-I says a BOP combines property, business interruption and liability but does not cover every risk, and its limits are usually lower. It does not include professional liability, and the NAIC says it typically excludes commercial auto and workers' compensation.
When does an umbrella policy begin paying?
Triple-I says an umbrella begins to pay once a covered loss uses up the per-occurrence limit of the primary policy. It generally sits above underlying policies such as general liability and auto, and many umbrellas exclude risks like professional liability and employment practices claims.
What is the difference between occurrence and claims-made?
Triple-I explains that an occurrence policy covers incidents that happen while it is in force, whereas a claims-made policy responds based on the policy in force when the claim is made. With claims-made coverage, ask about the retroactive date and what reporting period applies after the policy ends.
Sources
- Triple-I: Liability insurance for small businesses
- Triple-I: Commercial general liability insurance
- Triple-I: Product liability, recall and contamination insurance
- Triple-I: Understanding business owners policies (BOPs)
- Triple-I: Insurance for artisan contractors
- Triple-I: Professional liability insurance
- NAIC: Small business insurance
- Texas Department of Insurance: Commercial general liability insurance
- Texas Department of Insurance: Certificates of insurance FAQ